TI - 11 TWO CIRCLES WITHIN A CIRCLE

Key Elements:

• having the centre of the large circle, and the "touching point" of the two small circles at the same spot.
• the "loops" being circles.
• the "touching point" of the small circle and the large one at the top at the same point as entrance and exit of large circle. (crossing this point three times)

Description:

• "IN" call:
  at <30^40
• The top small loop (diameter approximately 20°) is flown first. The large loop has an 40° diameter. The bottom of the large -and the small lower- circle are about 5° of the ground.
• "OUT" call:
  at >30^40.

last changes: march 1, 1999